Helping to keep the earth beautiful

Expandmenu Shrunk


  • Tag Archives environment
  • What happens to aluminum in the recycling process?

    Aluminium recycling is not new.   Aluminium recycling is the process by which scrap aluminum can be reused in products after its initial production.  It has been a common practice since the early 1900s and extensively capitalized during World War II.    It was, however, a low-profile activity until the late 1960s when the exploding popularity of aluminium beverage cans finally placed recycling into the public consciousness.

    The process involves  re-melting the metal.  This is far less expensive and energy intensive than creating new aluminium through the electrolysis of aluminium oxide (Al2O3), which must first be mined from bauxite ore and then refined using the Bayer process. Since recycling does not transmute the element, aluminium can be recycled indefinitely and still be used to produce any product for which new aluminium could have been used.

    Recycling aluminium uses about 5% of the energy required to create aluminium from bauxite.

    The recycling of aluminium  produces significant cost savings over the production of new aluminium ….even when the cost of collection, separation and recycling are taken into account.   Over the long term, even larger national savings are made when the reduction in the capital costs associated with landfills, mines and international shipping of raw aluminium are considered.  Recycling aluminium uses about 5% of the energy required to create aluminium from bauxite. 

    For this reason, approximately 31% of all aluminium produced in the United States comes from recycled scrap.  The amount of energy required to convert aluminium oxide into aluminium can be vividly seen when the process is reversed during the combustion of thermite or ammonium perchlorate composite propellant.

    Used beverage containers are the largest component of processed aluminum scrap, with most UBC scrap manufactured back into aluminum cans.  Other sources for recycled aluminium include aircraft, automobiles, bicycles, boats, computers, cookware, gutters, siding, wire, and many other products that need a strong light weight material, or a material with high thermal conductivity.

    After collection, the scrap aluminium is separated into a range of categories such as  irony aluminium (engine blocks etc.), clean aluminium (alloy wheels) and then cleaned in preparation for the next step.  Tthe specification of the required ingot casting it will determine on the type of scrap used in the start melt.  The scrap is then taken to a reverberatory furnace (other methods appear to be either less economical and/ or dangerous) and melted down to form a “bath”.  The re-melt process removes any coatings or nk that may be present on the aluminum.  The molten metal is tested using spectroscopy on a sample taken from the melt to determine what refinements are needed to produce the final casts.   After any necessary refinements have been added the melt may be tested several times to be able to fine tune the batch to the specific standard

    Once the”recipe” of metal is correct, the furnace is tapped and poured into ingot moulds, usually via a casting machine. The melt is then left to cool, stacked and sold on as cast silicon aluminium ingot to various industries for re-use.

    There is also a secondary recycling process for aluminum.   White dross from primary aluminium production and from secondary recycling operations still contains useful quantities of aluminium which can be extracted industrially.  The process produces aluminium billets, together with a highly complex waste material.  This is a difficult to manage waste because it reacts with water, releasing a mixture of gases (including, among others, hydrogen, acetylene, and ammonia) which spontaneously ignite on contact with air.   Contact with damp air results in the release of large quantities of ammonia gas. Despite these difficulties, the waste has found use as a filler in asphalt and concrete.

     

     

    Of course there are creative ways to recycle also.  Check out what some people have done to make good use of their aluminum.CERT-34104 aluminum recycling rim table bike wheel trellis

     

    Aluminum is an amazing metal!

     



  • Copper….What happens in the life of copper metal?

    Copper products are hard wearing and last for a long time and will often still function long after they have been superseded by newer modelsThis metal  can be recycled indefinitely as it does not degrade when processed.   Recycling  this scrap metal can reduce emissions and energy output compared to production from virgin materials as well as protect our natural resources.

    Benefits of recycling copper

    The economic and environmental benefits of recycling copper are given below and illustrate the sustainable nature of the metal:

    Environment……During mining and refining (purification) of copper, dust and waste gases such as sulphur dioxide are produced which may have a harmful effect on the environment. Although these harmful effects are minimised by producers (sulphur dioxide is captured and used to make sulphuric acid), with recycling there are little, if any, harmful gases emitted.

    Disposal of copper is often in holes in the ground – this is called landfill.  These holes are rapidly being filled up and, as they become scarcer, landfill becomes a very expensive option for waste disposal (of any material).

    Energy saving ……In order to extract copper from copper ore the energy required is approximately 100GJ/tonne. Recycling  uses much less energy, about 10GJ/tonne, that’s only 10% of the energy needed for extraction. This energy saving leads to the conservation of valuable reserves of oil, gas or coal and reduces the amount of CO2  released into the atmosphere.

    Conservation of copper ore……To date only about 12% of known resources have been mined. However copper ore is a finite resource and it makes sense to conserve ore by recycling.

    Economics……It is cheaper to recycle old copper than to mine and extract new copper. Recycled copper is worth up to 90% of the cost of the original copper. Recycling helps to keep the cost of  products down.

    What Happens When It’s Recycled?

    When copper scrap is first received for recycling, it is inspected and graded. The scrap material is melted and in some cases brought to higher purity while molten. Chemical analysis checks the purity level.   The molten copper is cast into a cake or a block for further processing.

    Copper alloy scrap has to be segregated, kept clean and identified so that the alloying elements and impurity content of each batch are known. Copper alloys are then melted together into batches of known composition, some with virgin material so that the recycled material has the alloy composition desired.

     

    man in fireproof suit moving a tub of molten copper



  • Metal Recycling Facts

    To meet the goals of efficient management of limited resources, cost reduction and the reduced use of landfills, recycling has become increasingly important to both society and industry. Our society is accusstomed to hearing the three R’s of recycling (reduce, reuse, recycle) to include paper, plastics, bottles, cans, and cardboard; however, many people do not know that you can recycle metal as well. Recycling metal has many benefits including reducing pollution, saving resources, reducing waste going to landfills and preventing the destruction of habitats from mining new ore.

    “Scrap-recycling facilities are like mines above ground, rich with resources that can be reused to preserve the environment, at a fraction of the cost to mine and refine metals from virgin ores. Scrap metal is not waste or trash. Rather, it is a continuous resource – made from old automobiles, appliances, buildings, bridges, airplanes and more. Scrap metal may, in fact, be one of our most precious resources. Because it can be re-melted and reshaped into new products countless times, scrap metal is a resource that will never be depleted.”

     

    Energy Conservation

    The amount of energy saved when using various recycled metals compared to virgin ore is up to:

    • 92 % for aluminum
    • 90 % for copper
    • 56 % for steel

    According to the U.S. Environmental Protection Agency, when you recycle a single aluminum beverage can, you help conserve enough energy to power a 60-watt light bulb for more than four hours.

     

    Environmental Benefits

    Recycling your metal conserves natural resources by reducing greenhouse gas emissions and using less energy than making metal from virgin ore. New metal production releases a far greater amount of greenhouse gas emissions compared with making products from recycled metal. These emissions may influence climate change along with the possibility of also causing harmful levels of air pollution in cities, which can result in potential respiratory health problems for you and other residents. TheI  Institute of  Scrap Recycling Industries(ISRI) reports that recycling metal may cut greenhouse gas emissions by 300 million to 500 million tons.

    In addition, the use of  scrap metal instead of virgin ore generates 97% less mining waste and uses 40% less water, according to the National Institute of Health.

    An additional bonus is that your environment is clean!

     

    Economic Benefits

    According to the National Institute of Health, the recycling of scrap  metal creates 36 times more jobs than sending the same amount of metal waste to the incinerator, and six times more than sending the metal to a landfill.according to the National Institute of Health. The National Recycling Coalition says the recycling industry in general generates $236 billion annually. More than a million workers across Americaare employed.

    Metal recycling is contributes to the solution of global warning, NOT the problem.  Sable Metal Recycling is proud to be part of the solution. Be kind to the environment and recycle your metal.  We will take your copper, brass, aluminum, stainless steel , wire, radiators, catalytic converters, alternators and much more.  Call 775 0772 and recycle your metal today!

     

    References:

    http://www.livestrong.com/article/132349-benefits-recycling-metal/#ixzz1pX3qk5a0

    http://www.alcoa.com/global/en/environment/pdf/importance_of_recycling.pdf